18Kt Yellow Gold
The solid 7mm wide 18 karat Yellow Gold Bracelet is alloyed with the precious metals of copper and silver to give it the rich, warm gold glow. The matching Brass screws plated in matching hue to blend the entire bracelet. The set is completed with the matching Yellow Gold plated Brass socket screwdriver for a lifetime of wear.
Using a tape measure, measure the circumference of your wrist at the wrist bone. Hold the tape snugly around your wrist. If you do not have a tape measure, feel free to print the one included here. Be sure it is in proper scale and cut out on the designated lines.
Unlike most bracelets which come in 2 sizes, men’s and women’s, we are providing the bracelet in 6 optional sizes for a better fit and comfort. Any need for a bracelet either smaller or larger than these can be special ordered.
The suggested sizes are as follows. Wrist measured between:
|5 and 5 ¾||2||12.5 – 14.5|
|5 ¾ and 6 ¼||3||14.5 – 16|
|6 ¼ and 6 ¾||4||16 – 17.25|
|6 ¾ and 7 ¼||5||17.25 – 18.5|
|7 ¼ and 7 ¾||6||18.5 – 19.7|
|7 ¾ and 8 ¼||7||19.7 - 21|
The I REMEMBER bracelet was designed to be worn permanently. It comes fully assembled and opens and closes with its own customized screwdriver and two screw fasteners. There are two screws on opposite sides of the bracelet, of which only one needs to be opened.
1) Remove the bracelet from its signature box. Place the screwdriver head onto one of the screws and gently turn it counterclockwise. Carefully loosen the screw and the bracelet will open easily. It is not necessary to remove the screw completely.
2) Mount the bracelet on your wrist. Insert the screw into its slot. Take the screwdriver and turn the screw clockwise until secure. (Please don’t over tighten the screws.) To remove the bracelet, reverse the procedure.
3) To clean the bracelet, rub gently with a soft cloth, rinse in warm soapy water, dry thoroughly.
Please visit REPLACEMENT PARTS & ACCESSORIES in our CUSTOMER SERVICE section to order additional screw fasteners or screwdriver.